Glide Installation for Iron Patio Furniture
Use indoors or out - for iron patio-type furniture.
INSTALLS IN SECONDS - NO TOOLS NEEDED

Replace old fashioned, cup-style glides with high-grade, space-age plastic for long wear and durability. Resilient cushion continually adjusts glide surface to match floor or patio irregularities. Safe for wood decks, brick pavers, concrete, linoleum, parquet, hardwood and tile.

1. Remove old glides and clean surface under metal cup (glide housing).

2. Remove one side of the liner paper from foam ring and apply to top (honey-comb) surface of glide body.

3. Remove the remaining side of liner paper from foam ring and press firmly into metal cup of chair.

4. For other applications, press bond firmly and allow adhesive to cure for several hours before moving furniture.

Glide Installation for Wood Furniture

1. Drill a small hole in the bottom of the leg surface.

2. Put the screw through the hole in the hollow side of the cup and attach it to the leg.

3. Pop out and discard the center foam disc. Remove one liner paper from the foam and attach the sticky side to the web side of the glide.

4. Remove last liner paper and insert the foam/glide assembly firmly up into the hollow cup on leg.

5. Set the furniture upright. May be used immediately. Enjoy years of trouble-free service.